NETGEAR WAC510 - Technical specifications

Technical specifications
The following table shows the technical specifications of the access point.
Table 4. Technical specifications
DescriptionFeature
2.4 GHz band: 802.11ng, 801.11bg, and 802.11b
5 GHz band: 802.11ac, 802.11na, and 802.11a
Supports 2.4 GHz and 5 GHz concurrent operation
Supported WiFi radio
frequencies and WiFi
modes
About 1300 Mbps simultaneous throughput (400 Mbps on the 2.4 GHz band and
867 Mbps on the 5 GHz band)
Note: Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
Maximum theoretical
throughput
Maximum number of 2.4 GHz WiFi clients: 200 (200 per radio)
Maximum number of 5 GHz WiFi clients: 200 (200 per radio)
Maximum number of clients for the access point: 400 (2 radios)
Maximum number of
supported clients
IEEE 802.11ac Wave 2 standard
WiFi Multimedia Prioritization (WMM)
Wireless distribution system (WDS)
WiFi standards
WPA2 Personal, WPA2 Personal Mixed, and WPA2 Enterprise802.11 security
2.4 GHz band:
•
US and Canada: 2.412–2.462 GHz
•
Europe: 2.412–2.472 GHz
•
Australia: 2.412–2.472 GHz
•
Japan: 2.412–2.472 GHz
5 GHz band:
•
US and Canada: 5.18–5.24 + 5.745–5.825 GHz
•
Europe: 5.18–5.24 GHz and DFS (5.25–5.35 + 5.50–5.70)
•
Australia: 5.18–5.24 + 5.745–5.825 GHz
•
Japan: 5.18–5.24 GHz and DFS (5.26–5.32 + 5.50–5.64)
Operating frequency range
If you do not use a power adapter, the PoE port requires 802.3af (PoE) power.
PoE might be considered a network environment 0 per IEC TR 62101, and thus the
interconnected ITE circuits might be considered safety extra low voltage (SELV).
Power over Ethernet
9.3WPoE consumption
12 VDC, 2.5A
The plug is localized to the country of sale.
Power adapter
(The power adapter is not
included but can be
ordered as an option)
User Manual231Factory Default Settings and
Technical Specifications
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual