NETGEAR WAC510 - Page 232

Table 4. Technical specifications (Continued)
DescriptionFeature
One WAN PoE port and one regular (non-PoE) LAN port, both of which are
10/100/1000BASE-T RJ-45 ports with Auto Uplink (Auto MDI-X).
If you do not use a power adapter, the PoE port requires 802.3af (PoE) power.
Hardware interfaces
7.75 x 7.75 x 1.45 in. (197.32 x 197.32 x 37 mm)Dimensions (W x D x H)
1.22 lb (555.5 g)Weight
32º to 104ºF (0° to 40°C)Operating temperature
10 to 90% maximum relative humidity, noncondensingOperating humidity
–4° to 158°F (–20º to 70ºC)Storage temperature
5 to 95% maximum relative humidity, noncondensingStorage humidity
47 CFR FCC Part 15, Subpart B, Class B
ICES-003:2016 Issue 6, Class B
47 CFR FCC Part 15, Subpart C (Section 15.247)
47 CFR FCC Part 15, Subpart E (Section 15.407)
FCC Part 2 (Section 2.1091)
KDB 447498 D03
Regulatory compliance US
47 CFR FCC Part 15, Subpart B, Class B
ICES-003:2016 Issue 6, Class B
Canada RSS-247 Issue 1 (2015-05)
Canada RSS-Gen Issue 4 (2014-11)
Regulatory compliance
Canada
EN 55032:2012 + AC:2013/CISPR 32:2012
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55024:2010
EN 300 328 V1.9.1 (2015-02)
EN 301 893 V1.8.1 (2015-03)
EN 50385:2002
EN 50581.2012
EN 50564: 2011
EN 60950-1 2005 (ed.2) + A1:2009 + A2:2013
EN 60950-1:2006 + A11:2009 + A12:2011 + A2:2013
Regulatory compliance
Europe
AS/NZS CISPR 32:2013, Class B
AS/NZS 4268:2012 + A1:2013
AS/NZS 4268:2012 + A1:2013
AS/NZS 2772.2:2011
Regulatory compliance
Australia
User Manual232Factory Default Settings and
Technical Specifications
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual