If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4.
Select Management > Configuration > System > Advanced > User Accounts.
5. Click the add user account icon.
Additional fields and a menu display.
6.
Specify the settings for the new user account:
•
User Name. Enter a user name.
•
Password. Enter a password between 8 and 64 characters in length. The password
must contain at least one uppercase letter, one lowercase letter, and one number.
The following special characters are allowed:
! @ # $ % ^ & * ( )
•
Privilege. From the menu, select Read-Write or Read-Only.
•
Session Timeout. Use the Hours and Minutes fields to specify the period after
which a session automatically expires and the user must log in again.
By default, a session expires after 45 minutes.
7. Click the Apply button.
Your settings are saved.
User Manual118Manage Access and Security
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
