NETGEAR WAC510 - Page 122

If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4.
Select Management > Configuration > Security > Neighbor AP.
The page that displays lets you select the radio band (2.4GHz or 5GHz).
5.
Click the > button to the left of the radio band.
The Neighbor AP page displays for the selected radio band.
6. Select the Enable Neighbor AP check box.
7. Click the Apply button.
Your settings are saved. Neighbor AP detection is now enabled.
8. From the Detection Policy menu, select the scan method:
•
Mild. The access point scans for neighbor access points every 15 minutes. This
is the default setting.
•
Moderate. The access point scans for neighbor access points every 5 minutes.
•
Aggressive. The access point scans for neighbor access points every 1 minute.
User Manual122Manage Access and Security
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual