4.
Select Management > Configuration > IP > LAN.
The settings of the default DHCP server apply to the management VLAN, which, by
default, is VLAN 1. For information about setting the 802.1Q VLAN and the
management VLAN, see Set the 802.1Q VLAN and management VLAN on page 138.
By default, the Management VLAN DHCP Server Enable radio button is selected.
5.
Specify the settings that are described in the following table.
DescriptionSetting
Enter the starting IP address of the DHCP IP address range.
By default, the address is 192.160.0.2.
Starting Address
Enter the ending IP address of the DHCP IP address range.
By default, the address is 192.168.0.50.
Ending Address
Enter the subnet mask that is used for all IP addresses in the DHCP IP address range.
By default, the mask is 255.255.255.0.
Subnet Mask
The IP address of the gateway that is used by your Internet modem.
By default, the address is 192.168.0.100.
Gateway
User Manual150Manage the Local Area Network
and IP Settings
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
