NETGEAR WAC510 - Page 177

If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Maintenance > Upgrade > Backup and Restore > Backup
Settings.
The Backup Settings page displays.
5. Click the Backup button.
A pop-up window opens.
6.
Enter a password to protect the backup file, and click the Continue button.
You can either using your existing password (the one that you use to log in to the
access point) or enter a unique password.
The password must be 8 to 63 characters in length and must contain at least one
uppercase letter, one lowercase letter, and one number. The following special
characters are allowed:
! @ # $ % ^ & * ( )
Tip: We recommend that you write down the password because you must enter it
again if you restore the configuration from the backup file.
7.
Choose a location to store the file on your computer.
The name of the backup file is WAC510-WAC510-dd-mm-yy_hh-mm-ss-config.tar,
in which dd is the date, mm is the month, yy is the year, hh is the hour (in 24-hour
format), mm is the minutes, and ss is the seconds.
An example of a name of a backup file is
WAC510-WAC510-02-15-19_18-56-53-config.tar.
8.
Follow the directions of your browser to save the file.
User Manual177Manage and Maintain the Access
Point
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual