The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Monitoring > Neighbor AP.
At the top of the page, for each radio band, the page states the total number of
unknown access points.
5.
To display the most recent unknown access points, click the Refresh button.
6. To view the Known AP list, click the Known AP tab.
At the top of the page, for each radio band, the page states the total number of
known access points.
7.
To display the most recent known access points, click the Refresh button.
User Manual196Monitor the Access Point and the
Network
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
