NETGEAR WAC510 - Page 200

12.
To view very detailed information about a WiFi client, do the following:
a.
Click the information icon to the left of the client.
The Detailed Client Information page displays and shows the following
information:
•
MAC Address. The MAC address of the client.
•
IP Address. The IP address associated with the client.
•
Host Name. The host name of the client.
•
OS. The operating system that runs on the client.
•
BSSID. The BSSID that the client connects to.
•
SSID. The SSID of the radio that the client connects to.
•
Channel. The channel that the client connects to.
•
Channel Width. The width of the channel that the client connects to.
•
Tx Rate. The rate of traffic transmission of the client.
•
Rx Rate. The rate of traffic reception of the client.
•
RSSI. The RSSI threshold value of the client.
•
Tx Bytes. The number of bytes that the client transmitted.
•
Rx Bytes. The number of bytes that the client received.
•
State. The QoS state of the connection.
•
Type. The type of WiFi security that is used for the connection.
•
Device Type. The type of device that the client is.
•
Mode. The WiFi mode of the connection.
•
Status. The security status of the connection.
•
Idle Time. The time that the client remained idle.
•
Assoc Time Stamp. The time that is associated with the information on the
Detailed Client Information page.
b. Click the Close button.
The Detailed Client Information page closes.
User Manual200Monitor the Access Point and the
Network
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual