If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Monitoring > Logs.
The page shows the following information for each log entry:
•
Date and time. The date and time that the entry was logged.
•
Action. The action that occurred, such as whether a WLAN connection was made.
•
Source. The name, IP address, or MAC address of a source device, application,
or website, if applicable.
•
Target. The name, IP address, or MAC address of a target device, application,
or website, if applicable.
User Manual206Monitor the Access Point and the
Network
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
