3. Use an Ethernet cable to connect your computer to a LAN port on the access point.
4. On the computer, open a web browser and enter 192.168.0.100 in the address
bar.
The Day Zero Easy Setup page displays.
5.
If your browser does not open the Day Zero Easy Setup page but displays a security
message and does not let you proceed, do one of the following:
•
Google Chrome. If Google Chrome displays a Your connection is not private
message, click the ADVANCED link. Then, click the Proceed to 192.168.1.1
(unsafe) link, in which x.x.x.x represents the IP address of the switch, and install
a security certificate.
•
Apple Safari. If Apple Safari displays a This connection is not private message,
click the Show Details button. Then, click the visit this website link. If a warning
pop-up window opens, click the Visit Website button. If another pop-up window
opens to let you confirm changes to your certificate trust settings, enter your Mac
user name and password and click the Update Setting button.
•
Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure
message, click the ADVANCED button. Then, click the Add Exception button.
In the pop-up window that opens, click the Confirm Security Exception button
and install a security certificate
•
Microsoft Internet Explore. If Microsoft Internet Explorer displays a There is a
problem with this website’s security certificate message, click the Continue to
this website (not recommended) link and install a security certificate.
•
Microsoft Edge. If Microsoft Edge displays a There is a problem with this website’s
security certificate message or a similar warning, select Details > Go on to the
webpage and install a security certificate.
User Manual38Install the Access Point in Your
Network and Access It for Initial
Configuration
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
