NETGEAR WAC510 - Page 53

To disable or enable a WiFi network or set up a WiFi activity schedule:
1.
Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4.
Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5.
Click the > button to the left the SSID.
The settings for the selected SSID display.
6.
Under Schedule, select one of the following radio buttons:
•
Always ON. The WiFi network is enabled.
•
Always OFF. The WiFi network is disabled.
•
Custom. The WiFi network is enabled or disabled according to a schedule that
you must set up.
An icon displays to the right of the radio button.
7.
If you select Custom in the previous step, do the following:
a. Click the icon next to the radio button.
A pop-up window opens.
b.
Either select a predefined time from the Preset menu or select custom time
blocks by clicking the time blocks.
A blue color for a time block indicates that the WiFi network will be enabled (on).
A gray color for a time block indicates that the WiFi network will be disabled (off).
User Manual53Manage the Basic WiFi and
Radio Features
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual