DescriptionSetting
By default, the Turn Radio On check box is selected and the radio broadcasts. Turning
off a radio disables WiFi access for the band, which can be helpful during
configuration, network tuning, or troubleshooting.
Turn Radio On
Select one of the following WiFi modes for the 2.4 GHz radio:
•
11b. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
However, the speed of 802.11n and 802.11g clients is limited to the maximum
speed that is supported by 802.11b (about 11 Mbps).
•
11bg. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
However, the speed of 802.11n clients is limited to the maximum speed that is
supported by 802.11g (about 54 Mbps).
•
11ng. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
This is the default setting.
Select one of the following WiFi modes for the 5 GHz radio:
•
11a. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access point.
However, the speed of 802.11ac and 802.11na clients is limited to the maximum
speed that is supported by 802.11a (about 54 Mbps).
•
11na. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access
point. However, the speed of 802.11ac clients is limited to the maximum speed
that is supported by 802.11n (generally, ranging from about 300 Mbps to about
450 Mbps).
•
11ac. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access
point. This is the default setting.
Wireless Mode
From the menu, select the modulation and coding scheme (MCS) index and data
transmit rate for the radio. The default is Best. For most networks, the default settings
work fine. The available settings also depend on the selection from the Channel
Width menu and the selection from the Guard Interval menu.
MCS Index / Data Rate
User Manual78Manage the Basic WiFi and
Radio Features
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
