4.
Select Management > Configuration > Wireless > Advanced.
5.
Configure the settings as described in the following table.
The descriptions in the table apply to both radios. You can specify the radio settings
for the 2.4 GHz and 5 GHz radios individually, but the 802.11n 256 QAM feature
applies to the 2.4 GHz radio only and the MU-MIMO and 802.11h features apply to
the 5 GHz radio only.
DescriptionSetting
Enter the maximum number of WiFi clients that can simultaneously associate with
the radio. The range is from 1 to 200. The default is 64 WiFi clients.
Max. Wireless Clients
Enter the Request to Send (RTS) threshold. The range is from 256 to 2346. The default
is 2346.
If the packet size is equal to or less than the RTS threshold, the radio uses the Carrier
Sense Multiple Access with Collision Detection (CSMA/CD) mechanism and the data
frame is transmitted immediately after the silence period. If the packet size is larger
than the RTS threshold, the system uses the CSMA with Collision Avoidance
(CSMA/CA) mechanism. In this situation, the transmitting device sends the RTS packet
to the receiving device and waits for the receiving device to return a Clear to Send
(CTS) packet before sending the actual packet data.
RTS Threshold
(256-2346)
User Manual92Manage the Advanced WiFi and
Radio Features
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
