EasyManuals Logo

NETGEAR Wireless-N User Manual

NETGEAR Wireless-N
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
4-5 Managing Your Network
v1.0, January 2010
Table 4-1. Modem Router Status Fields
Field Description
Account Name The host name assigned to the modem router.
Firmware Version The version of the modem router firmware. It changes if you upgrade the
modem router.
Internet
Port
MAC Address The Media Access Control address. This is the unique physical address
being used by the Internet (WAN) port of the modem router.
IP Address The IP address being used by the Internet (WAN) port of the modem router.
If no address is shown, or is 0.0.0.0, the modem router cannot connect to
the Internet.
DHCP None. The modem router uses a fixed IP address on the WAN.
DHCP Client. The modem router obtains an IP address dynamically from
the ISP.
IP Subnet Mask The IP subnet mask being used by the Internet (WAN) port of the modem
router. For an explanation of subnet masks and subnet addressing, click the
link to the online document “TCP/IP Networking Basics” in Appendix C.
Domain Name
Server
The Domain Name Server addresses being used by the modem router. A
Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
LAN Port MAC Address The Media Access Control address. This is the unique physical address
being used by the Ethernet (LAN) port of the modem router.
IP Address The IP address being used by the Ethernet (LAN) port of the modem router.
The default is 192.168.0.1.
DHCP Identifies whether the firmware’s built-in DHCP server is active for the LAN-
attached devices.
IP Subnet Mask The IP subnet mask being used by the Ethernet (LAN) port of the modem
router. The default is 255.255.255.0.
Wireless
Port
Name (11N
SSID)
The 11N wireless network name (SSID) being used by the wireless port of
the modem router. The default is NETGEAR-DualBand-N.
Name (11G
SSID)
The 11G wireless network name (SSID) being used by the wireless port of
the modem router. The default is NETGEAR-2.4-G.
Region The geographic region where the modem router is being used. It might be
illegal to use the wireless features of the modem router in some parts of the
world.
11N Channel Identifies the 11N channel of the wireless port being used. Click the link to
the online document “Wireless Networking Basics” in Appendix C for the
frequencies used on each channel. In Up to 270Mbps at 5GHz & 54Mbps
at 2.4GHz mode, there are two channels: a primary channel (P) and a
secondary channel (S).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Wireless-N and is the answer not in the manual?

NETGEAR Wireless-N Specifications

General IconGeneral
Wireless SpeedUp to 300 Mbps
Frequency Band2.4 GHz
VPN SupportNo
Antennas2 external antennas
SecurityWPA, WPA2, WEP
Ethernet Ports4 x 10/100 Mbps LAN ports, 1 x 10/100 Mbps WAN port

Related product manuals