NETGEAR XS728T ProSAFE - Flash Logs

Monitoring
158
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
The Total Number of Messages field is displayed. This contains the number of
messages the system has logged in memory. Only the 128 most recent entries are
displayed.
The rest of the screen displays the buffered logs messages. Messages logged to a
collector or relayed through syslog have the following format:
10 Oct 2012 14:17:43%AAA-I-DISCONNECT: http connection for user
admin, source 10.5.70.19 destination 10.5.234.201 TERMINATED
10 Oct 2012 13:52:00%AAA-I-CONNECT: New http connection for user
admin, source 10.5.70.19 destination 10.5.234.201 ACCEPTED
The syslog message includes the following fields:
• Date
• Time
• Module (AAA in the example above).
• Severity (I in the example above).
• Action (DISSCONNECT in the example above).
• Description (http connection for user admin, source 10.5.70.19
destination 10.5.234.201 TERMINATED in the example above).
To refresh the screen, click Update.
Flash Logs
Flash logs are stored in the Flash and so are not lost when the device reboots.
 To configure the Flash Logs settings:
1. Select Monitoring > Logs > Flash Logs.
2. In the Admin Status field select Enable to enable system logging or Disable to disable it.
The factory default setting is Disable.
3. In the Severity Filter field, select the level of severity of SYSLOGs that will be logged.
4. If you change the settings, click Apply to apply the changes to the system and save them.
The Total Number of Messages field is displayed. This contains the number of
messages the system has logged in memory. Only the first 128 most recent entries are
displayed.
The rest of the screen displays the flash logs messages. Messages logged to a collector
or relayed through syslog have the following format:
214483269 13 Feb 2015 14:17:43%AAA-I-DISCONNECT: http connection
for user admin, source 10.5.70.19 destination 10.5.234.201
TERMINATED