System
36
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
6. Click Apply to apply the new settings to the system.
Configuration changes take effect immediately.
Local Information
Use the LLDP Local Information screen to view the data that each port advertises through
LLDP.
To display the LLDP Local Device Information screen:
1. Select System > LLDP > Advanced > Local Information.
The following table describes the device information displayed:
Field Description
Chassis ID Subtype Type of chassis ID (for example, MAC address).
Chassis ID Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the device appears
System Name Name of device.
System Description Description of the device (in alpha-numeric format).
System Capabilities Primary functions of the device, such as bridge, WLAN AP, or router.
The following table describes the LLDP local information that displays for each port.
Field Description
Interface The interface with the information to display.
Port ID Subtype Identifies the type of data displayed in the Port ID field.
Port ID Identifies the port ID according to the Port ID subtype setting.
Port Description Identifies the user-defined description of the port. For information about how
to configure the port description, see
Ports on page 48.
Advertisement Displays the advertisement status of the port.
2. T
o view more details about a port, click the name of the port in the Interface column of the
Port Information table.
The following table describes the detailed local information that displays for the selected port:
Field Description
Managed Address
Address SubType Displays the type of address the management interface uses, such as an IPv4
address.
Address Displays the address used to manage the device.
To Next Page
Loading...
