Hardware Specifications and Default Values
183
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Password control access 1 Idle time-out = 10 minutes
Password = password
Management security 1 profile with 20 rules for
HTTP/HTTPS/SNMP access to
allow/deny an IP address/subnet
All IP addresses allowed
Port MAC lock down All ports Disabled
Boot code update Boot code is automatically
updated together with firmware
upgrade.
N/A
DHCP/manual IP 1 DHCP enabled/192.168.0.239
Default gateway 1 192.168.0.254
System name configuration 1 NULL
Configuration save/restore 1 N/A
Firmware upgrade 1 N/A
Factory default reset 1 (web and front-panel button) N/A
Dual image support 1 Enabled
Multi-session web connections 5 Enabled
SNMPv1/V2c
SNMP v3
Max. 5 community entries Enabled (read, read-write
communities)
Time control 1 (Local or SNTP) Local Time enabled
LLDP/LLDP-MED All ports Enabled
Logging 4 (buffered flash, server & traps) Buffer Log enabled
MIB Support 1 Enabled
Smart Control Center N/A Enabled
Statistics N/A N/A
IGMP snooping v1/v2/v3 All VLANs Disabled
IGMP Snooping Querier All VLANs Disabled
Configurations upload/download 1 N/A
EAPoL flooding All ports Disabled
BPDU flooding All ports Disabled
Multicast groups 512 Disabled
Filter Multicast control 1 Disabled
Number of static routes 64 for IPv4 and IPv6, respectively N/A
Feature Sets Supported Default
To Next Page
Loading...
