System
38
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
The following table describes the information that displays for all LLDP neighbors that
have been discovered:
2. To view more information about the remote device, click the link in the MSAP Entry column.
The following table describes the information that displays for a selected port:
Field Description
MSAP Entry Displays the Media Service Access Point (MSAP) entry number for the
remote device.
Local Port Displays the interface on the local system that received LLDP
information from a remote system.
Chassis ID SubType Identifies the type of data displayed in the Chassis ID field on the remote
system.
Chassis ID Identifies the remote 802 LAN device's chassis.
Port ID SubType Identifies the type of data displayed in the remote system’s Port ID field.
Port ID Identifies the port ID according to the Port ID subtype setting.
System Name Identifies the system name associated with the remote device. If the field
is blank, the name might not be configured on the remote system.
Field Description
Port Details
Local Port Displays the interface on the local system that received LLDP information
from a remote system.
MSAP Entry Displays the Media Service Access Point (MSAP) entry number for the
remote device.
Basic Details
Chassis ID Subtype Identifies the type of data displayed in the Chassis ID field on the remote
system.
Chassis ID Identifies the remote 802 LAN device's chassis.
Port ID Subtype Identifies the type of data displayed in the remote system’s Port ID field.
Port ID Identifies the physical address of the port on the remote system from which
the data was sent.
Port Description Identifies the user-defined description of the port.
System Name Identifies the system name associated with the remote device.
System Description Specifies the description of the selected port associated with the remote
system.
System Capabilities Specifies the system capabilities of the remote system.
Managed Addresses
To Next Page
Loading...
