EasyManua.ls Logo

NETGEAR XS728T ProSAFE - Page 88

NETGEAR XS728T ProSAFE
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routing
86
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
IpOutNoRoutes The number of IP datagrams discarded because no route could be
found to transmit them to their destination. Note that this counter
includes any packets counted in ipForwDatagrams which meet this
`no-route' criterion. Note that this includes any datagrams which a host
cannot route because all of its default gateways are down.
IpReasmTimeout The maximum number of seconds which received fragments are held
while they are awaiting reassembly at this entity.
IpReasmReqds The number of IP fragments received which needed to be reassembled
at this entity.
IpReasmOKs The number of IP datagrams successfully re-assembled.
IpReasmFails The number of failures detected by the IP re-assembly algorithm (for
whatever reason: timed out, errors, etc.). Note that this is not
necessarily a count of discarded IP fragments since some algorithms
can lose track of the number of fragments by combining them as they
are received.
IpFragOKs The number of IP datagrams that have been successfully fragmented
at this entity.
IpFragFails The number of IP datagrams that have been discarded because they
needed to be fragmented at this entity but could not be, e.g., because
their Don't Fragment flag was set.
IpFragCreates The number of IP datagram fragments that have been generated as a
result of fragmentation at this entity.
IpRoutingDiscards The number of routing entries which were chosen to be discarded even
though they are valid. One possible reason for discarding such an entry
could be to free-up buffer space for other routing entries.
IcmpInMsgs The total number of ICMP messages which the entity received. Note
that this counter includes all those counted by icmpInErrors.
IcmpInErrors The number of ICMP messages which the entity received but
determined as having ICMP-specific errors (bad ICMP checksums, bad
length, etc.).
IcmpInDestUnreachs The number of ICMP Destination Unreachable messages received.
IcmpInTimeExcds The number of ICMP Time Exceeded messages received.
IcmpInParmProbs The number of ICMP Parameter Problem messages received.
IcmpInSrcQuenchs The number of ICMP Source Quench messages received.
IcmpInRedirects The number of ICMP Redirect messages received.
IcmpInEchos The number of ICMP Echo (request) messages received.
IcmpInEchoReps The number of ICMP Echo Reply messages received.
IcmpInTimestamps The number of ICMP Timestamp (request) messages received.
Field Description

Table of Contents

Related product manuals