-121, "Invalid character in number"
This error indicates that a numeric parameter contains an invalid character
or a character in the wrong place. The only characters allowed in a number
are:
G9
eE.+-
When using the binary number format, the only characters allowed are:
0
1
When using the octal number format, the only characters allowed are:
01234567
When
using the hexadecimal number format, the only characters allowed are:
@9
A-F
a-f
-150, "String data error"
This error
is
generated when the system parser detects an error in string type
data.
-151, "Invalid string data"
Usually caused by an error in string termination. The lEEE 488.2 standard
defines all quoted strings as having a closing quote.
If
the closing quote is
missing, usually due to a
<NL>
character being embedded in the string, this
error will be generated.
-191, "Out of string space"
Generated when the system parser runs out
of
space for commands and
parameters. It may occur
if
commands are not terminated correctly.
-192, "Out of token space"
Occurs when the system parser detects more command elements (headers
and parameters) than it can handle. It may also occur if commands are not
terminated correctly.
Execution
Errors
Execution Errors are associated with the interpretation
of
the converted
commands and parameters received. Incorrect parameter values and numeri-
cal range errors are types
of
execution errors. Any execution error will cause
the Execution Error bit @it
4)
in the Standard Event Status Byte to be set.
-220, "Parameter error"
This
is
a general parameter error.
If
this error occurs the parameter may be
invalid or inappropriate.
-222, "Data out of
range"
This error will occur if a parameter
is
out of
a
valid range or not in the set
of
valid parameters for a given command.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
