Newport 2832-C User Manual

-286, "Configuration not compatible"
This error will occur if an attempt is made to recall a system configuration
that
is not compatible with the detector currently attached to the meter.
-287, "Configuration not available*
This error will occur if an attempt is made to recall a system configuration
that has not been saved to and
is therefore not available.
-288, "Command not available"
This error will occur if an attempt is made to use a command that is not
available for the detector in use.
Device Errors
Device Errors are associated with some system condition that affects the
operation of the meter. Errors associated with data reading will set the
appropriate bit but will not generate an error message to avoid jamming the
error queue or the interface.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Newport 2832-C Specifications

General

Brand	Newport
Model	2832-C
Category	Measuring Instruments
Language	English