DISP
Display Brightness
Syntax:
DISP <level>
Parameters:
The parameter <level>
is
of type <number> which rounds to
an
integer in the
range
0
to
3.
0
corresponds to off,
1
to dim,
2
to normal, and
3
to bright.
Function:
This command sets the brightness of the display to a desired level. The valid
levels are off, dim, normal, and bright.
Returns:
None
Related Commands:
DISP?
Dm?
Display Brightness Query
Syntax:
DISP?
Parameters:
None
Function:
This query returns the brightness level
of
the display.
Returns:
<level>
<level> is of type <number> where
0
corresponds to off,
1
to dim,
2
to normal,
and
3
to bright.
Related Commands:
DISP
DISPCH
Display Channel Select
Syntax:
DISPCH <channel>
Parameters:
<channel>
is
of type <string> in a double quoted format.
The possible values
of
<channel> are
"A
for channel
A
and
"B"
for channel
B.
Function:
This command is used to select the channel that is displayed in the primary
display area of the meter.
If
the requested channel
is
not available then this
command will cause an error.
Returns:
None
Related Commands:
CH?, DISPCH?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
