Newport 2832-C User Manual

EXT
External Trigger Enable
Syntax:
EXT <enable>
Parameters:
The parameter <state> is either 0 or 1. If <state> is 0 then the external trigger
is disabled.
If <state> is 1 then the external trigger is enabled.
Function:
This command enables or disables the external trigger input on the back panel.
Related Commands: EXT?, EXTEDGE, EXTEDGE?
EXI?
External Trigger Enable Query
Syntax:
EXT?
Parameters: None
Function:
This query returns a value showing whether the external trigger input is
enabled or disabled.
Returns: <state>
<state>
is of type <number> that represents the integer 0, if the external
trigger input
is disabled, or 1, if the external trigger is enabled.
Related Commands: EXT, EXTEDGE, EXTEDGE?
EXTEDGE
External Trigger Edge Select
Syntax:
EXTEDGE <edge>
Parameters:
The parameter <edge> is either 0 or 1. If <edge> is 0 then the external trigger
is defined as a falling edge.
If <edge> is 1 then the external trigger is defined as
a rising edge.
Function:
This command defines whether the external trigger input on the back panel is
falling edge or rising edge active.
Related Commands: EXT, EXT?, EXTEDGE
E?mEDGE?
External Trigger Edge Query
Syntax:
EXTEDGE?
Parameters: None
Function:
This query returns a value showing which external trigger edge is the active edge.
Returns: <edge>
<edge>
is of type <number> and represents 0, if the external trigger is defined
as a falling edge, or
1, if the external trigger is defined as a rising edge.
Related Commands: EXT, EXT?, EXTEDGE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Newport 2832-C Specifications

General

Brand	Newport
Model	2832-C
Category	Measuring Instruments
Language	English