Page | 56
4.11 PREPARING A PLAY LIST
4.11.1 ADDING CLIPS
79. Select the Memo field for a clip in the CLIP LIST, and then press ADD TO PLAY LIST on the
Control Surface. (A single clip is added to the PLAY LIST.)
80. Select the CLIP ID cell for an event instead of a Memo, and press ADD TO PLAY LIST.
(Clips from all camera angles for the event are added to the PLAY LIST.)
81. Hold down SHIFT, and use the arrow keys to multi-select several clips by highlighting
their Memo fields. Press ADD TO PLAY LIST. (All selected are added to the PLAY LIST.)
82. Using the mouse, drag the Event ID field for an event row onto the PLAY LIST pane.
(Clips from all camera angles for the event are added to the PLAY LIST in order.)
4.11.2 EDITING AND PLAYBACK
83. Use the controls in the Audio columns of the PLAY LIST to adjust audio levels for the
clips.
84. Click a cell in the Transition column, and choose a different transition from the palette
that pops up.
Tip: To select a transition that isn’t currently shown in the palette, roll over one if the nine
icons, and click the + sign button that appears to see the Media Browser, which will let pick
another transition to replace the current palette entry.
85. Roll the Jog Wheel to move through the PLAY LIST sequence, and watch the output
monitor. As play moves from the Out Point of one clip to the In Point of the next, note
that the red ‘currently playing’ highlight in the Clip ID column at left tracks the current
playback position.
To Next Page
Loading...
