Page | 43
(Glance around this screen, which provides some useful session asset management tools,
but we’re going to press on to other features right now.)
4. To move on, click Start Session (Figure 33) to launch the Replay Desktop.
4.2 THE REPLAY DESKTOP
Figure 34
5. At this point, you should see the blank Replay Desktop (Figure 34).
6. We discussed configuring input and output
connections and devices for new sessions back
in sections:
3.4 (Input Connections)
3.7 (Configure Video Outputs)
3.7.4 (Multiview)
3.10 (Configure Audio).
Review these points if necessary, and set up
your connections (we’re assuming at least 3
cameras are connected as we continue).
To Next Page
Loading...
