HOME
TitleShort-Hidden -119
©
National Instruments Corporation
PXI-GPIB Specifications
Previous
Step
119
Declaration of Conformity
according to ISO/IEC Guide 22 and BS 7514
Manufacturer's Name: National Instruments
Manufacturer's Address: 6504 Bridge Point Parkway
Austin, Texas 78730-5039 USA
The manufacturer hereby declares that the product
Product Name: General Purpose Instrument Bus Interface for PXI
Model Numbers: PXI-GPIB CPCI-GPIB
Product Options: All.
conforms to the following standards or other normative documents:
Electromagnetic Emissions EN 55011: 1991
(by Council Directive 89/336/EEC) CISPR 11: 1990 (mod) Group 1, Class A at 10 meters
Electromagnetic Immunity EN 50082-1: 1992
(by Council Directive 89/336/EEC) IEC 801-2: 1991 (mod) 4.0 kV by Contact
8.0 kV by Air
IEC 801-3: Draft 5 3.0 V/m
26 .. 1000 MHz
900 MHz Digital RF
IEC 801-4: 1988 0.5 kV Signal Lines
1.0 kV AC Power Lines
Low Voltage Safety EN 61010-1: 1993
(by Council Directive 73/23/EEC) Based on V-0 rating of printed circuit board material.
Supplementary Information
Electromagnetic compatibility (EMC) requires the use of the manufacturer's X2 style GPIB interface cable.
When and Where Issued
10 June 1998
Austin, Texas
USA
Eric Lifsey
Compliance Engineer
Marks of Compliance European Contact
National Instruments Corporation (U.K.) Ltd.
21 Kingfisher Court, Hambridge Road
Newbury, Berkshire RG14 5SJ
Tel (44) 1635 523545 Fax (44) 1635 523154
To Next Page
Loading...
Need help?
General
