NI GPIB Series User Manual

HOME
TitleShort-Hidden -95 © National Instruments Corporation
GPIB-USB-A Specifications
Next
Step
Previous
Step
95
GPIB-USB-A Specifications
Table 23. GPIB-USB-A Hardware Characteristics
Characteristic Specification
Dimensions 10.7 by 6.5 by 2.7 cm
(3.6 by 2.6 by 1.0 in.)
Power Requirement
(from USB host or
self-powered hub)
2 unit loads (200 mA Maximum)
I/O Connector IEEE 488 Standard 24-pin male
Operating Environment
Temperature
Relative Humidity
0° to 55° C
10% to 90%, noncondensing
Storage Environment
Temperature
Relative Humidity
–20° to 70° C
10% to 90%, noncondensing
EMI FCC Class A Verified
Table 24. GPIB Software Transfer Rate for the GPIB-USB-A
Transfer Method Maximum GPIB Transfer Rate
3-wire (IEEE 488) Over 650 kbytes/s*
* Actual speed may vary considerably from speed shown because of system and
instrumentation capabilities.

NI GPIB Series Specifications

General

Operating Systems Supported	Windows, Linux, macOS
Driver Software	NI-488.2
Bus Interface	IEEE 488
Data Transfer Rate	Up to 8 MB/s
Compatibility	IEEE 488.1, IEEE 488.2
Connector Type	24-pin IEEE 488 connector
Maximum Cable Length	20 m total system length
Number of Devices Supported	Up to 14 devices per bus