NI GPIB Series User Manual

HOME
TitleShort-Hidden -124 © National Instruments Corporation
Important Information
Previous
Step
12
WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTS
National Instruments products are not designed with components and testing for a level of reliability suitable for use in or in
connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be
expected to cause significant injury to a human. Applications of National Instruments products involving medical or clinical treatment
can create a potential for death or bodily injury caused by product failure, or by errors on the part of the user or application designer.
Because each end-user system is customized and differs from National Instruments testing platforms and because a user or application
designer may use National Instruments products in combination with other products in a manner not evaluated or contemplated by
National Instruments, the user or application designer is ultimately responsible for verifying and validating the suitability of National
Instruments products whenever National Instruments products are incorporated in a system or application, including, without
limitation, the appropriate design, process and safety level of such system or application.

NI GPIB Series Specifications

General

Operating Systems Supported	Windows, Linux, macOS
Driver Software	NI-488.2
Bus Interface	IEEE 488
Data Transfer Rate	Up to 8 MB/s
Compatibility	IEEE 488.1, IEEE 488.2
Connector Type	24-pin IEEE 488 connector
Maximum Cable Length	20 m total system length
Number of Devices Supported	Up to 14 devices per bus