NI GPIB Series User Manual

127 pages

To Next Page

To Previous Page

HOME

TitleShort-Hidden -74

National Instruments Corporation

PMC-GPIB Installation

Step

5. Use the mounting hardware provided to fasten the PMC-GPIB to the host.

6. Reinstall the host, if you removed it to install the PMC-GPIB.

7. Turn on your system and start Windows.

The PMC-GPIB hardware installation is now complete.

Questions and Answers:

Need help?

Do you have a question about the NI GPIB Series and is the answer not in the manual?

General

Operating Systems Supported	Windows, Linux, macOS
Driver Software	NI-488.2
Bus Interface	IEEE 488
Data Transfer Rate	Up to 8 MB/s
Compatibility	IEEE 488.1, IEEE 488.2
Connector Type	24-pin IEEE 488 connector
Maximum Cable Length	20 m total system length
Number of Devices Supported	Up to 14 devices per bus