NI GPIB Series User Manual

HOME
TitleShort-Hidden -90 © National Instruments Corporation
GPIB-1394 Specifications
Previous
Step
90
Declaration of Conformity
according to ISO/IEC Guide 22 and BS 7514
Manufacturer's Name: National Instruments
Manufacturer's Address: 11500 North Mopac Expressway
Austin, Texas 78759-3504
USA
The manufacturer hereby declares that the product
Product Name: GPIB to IEEE-1394 Controller
Model Numbers: GPIB-1394
Product Options: All.
conforms to the following standards or other normative documents:
Electromagnetic Emissions EN 55011: 1991
(by Council Directive 89/336/EEC) CISPR 11: 1990 (mod) Group 1, Class A at 10 meters
Electromagnetic Immunity EN 50082-1: 1992
(by Council Directive 89/336/EEC) IEC 801-2: 1991 (mod) 4.0 kV by Contact
8.0 kV by Air
IEC 801-3: Draft 5 3.0 V/m
26 .. 1000 MHz
and 900 MHz Digital RF
IEC 801-4: 1988 0.5 kV Signal Lines
1.0 kV AC Power Lines
Low Voltage Safety: EN 61010-1: 1993 Based on V-0 rating of printed circuit board material.
(by Council Directive 73/23/EEC)
Supplementary Information
Electromagnetic compatbility (EMC) requires the use of shielded interface cables
When and Where Issued
14 January 1999
Austin, Texas
USA
Authorized Signature
Name: Eric Lifsey
Position: Compliance Engineer
Marks of Compliance European Contact
National Instruments Corporation (U.K.) Ltd.
21 Kingfisher Court, Hambridge Road
Newbury, Berkshire RG14 5SJ
Tel (44) 1635 523545
Fax (44) 1635 523154
øøøøøøøøøøøø

NI GPIB Series Specifications

General

Brand	NI
Model	GPIB Series
Category	Control Unit
Language	English