Chapter 19. Capturing Spectral Images (Spectral Detector) A1
54
(8) For channels that directly detect laser, click
channel-skip boxes
on the Binning/Skip
tab to set so that laser is not detected.
Note: Channels that catch reflected laser light
are covered with a mask (plate) and
channel data is not acquired. Selecting a
channel-skip box facilitates subsequent
spectrum analysis. The volume of data
is reduced a little.
(9) Click the [OK] button to set the optical path.
19.6 Determine image acquisition conditions.
(8)-2
(8)-1
(9)
(7)
To Next Page
Loading...
