Wheel System, Traction 93Service Manual – Focus II / Scrubtec R6 Rider Autoscrubber
Special Tools
Curtis 1311 Programmer PN 56409441
The Curtis 1311 Programmer (or the 1307 predecessor) may be
used to display drive controller error codes and program the drive
controller. With a programmer, diagnostics and troubleshooting is
more direct than with the Focus II display alone. The programmer
presents complete diagnostic information in plain language
without codes to decipher. Faults are displayed in the Diagnostic
Menu, and the status of the controller inputs/outputs is displayed
in the Test Menu.
The handheld programmer can also be used to access the drive
controller’s diagnostic history le. This le contains the history
of cleared error codes, which may be helpful in determining the
functional status of the machine between service intervals.
Refer to the Curtis 1311 Programmer manual for further
information regarding the use and operation of the handheld
programmer.
Tire “Puller” Kit PN 56422174
To Previous Page
Loading...
Need help?
General
