Nokia 7302 - Configuring SDP Bindings

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Leased Line Services
Issue: 13 3HH-11985-AAAA-TQZZA 115
exit
exit
...
----------------------------------------------
A:ALA-2>configure>service#
Configure ‘restricted-tagging’ on an SAP
When 'restricted-tagging' is enabled on a SAP, only double-vlan-tagged packets
arriving at the SAP will be forwarded. Packets with outer TPID as 0x8100 and inner
TPID 0x8100 are alone considered as double-vlan-tagged packets.
The following example displays restricted-tagging configuration:
*A:ALA-Dut-B>configure>service>epipe# info
----------------------------------------------
description "Default epipe description for service id 2100"
sap lt:1/1/1:4 create
description "Default sap description for service id 2100"
restricted-tagging
exit
no shutdown
----------------------------------------------
*A:ALA-Dut-B>configure>service>epipe#
To disable restricted-tagging, use the no restricted-tagging command.
*A:ALA-Dut-B>configure>service>epipe# info
----------------------------------------------
description "Default epipe description for service id 2100"
sap lt:1/1/1:4 create
description "Default sap description for service id 2100"
no restricted-tagging
exit
no shutdown
----------------------------------------------
*A:ALA-Dut-B>configure>service>epipe#
4.4.2.4 Configuring SDP Bindings
Figure 12 displays an example of a distributed Epipe service configuration between
two routers, identifying the service and customer IDs, and the uni-directional SDPs
required to communicate to the far-end routers.