FD 100/320Gbps NT and FX NT IHub Services Guide Services Overview
Issue: 13 3HH-11985-AAAA-TQZZA 99
Table 44 describes the command output fields.
Table 44 Show Service Service-using Command Output Fields
Sample output:
*A:ALA-12# show service service-using customer 10
==================================================================
Services
============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
----------------------------------------------------------------------------
1 VPLS Up Up 10 09/05/2006 13:24:15
100 IES Up Up 10 09/05/2006 13:24:15
300 Epipe Up Up 10 09/05/2006 13:24:15
----------------------------------------------------------------------------
Matching Services : 3
Context show>service
Description This command displays the services matching certain usage properties. If no optional
parameters are specified, all services defined on the system are displayed.
Parameters epipe — Displays matching Epipe instances
ies — Displays matching IES instances
vpls — Displays matching vpls instances
m-vpls — Displays matching m-vpls instances
v-vpls — Displays matching v-vpls instances
vprn — Displays matching VPRN services
mirror — Displays matching mirror services
sdp sdp-id — Displays only services bound to the specified SDP ID.
Default: Services bound to any SDP ID.
Values: 1...17407
customer customer-id — Displays services only associated with the specified customer ID.
Default: Services associated with a customer.
Values: 1...2147483647
Label Description
Service Id The service identifier.
Type Specifies the service type configured for the service ID.
Adm The desired state of the service.
Opr The operating state of the service.
CustomerID The ID of the customer who owns this service.
Last Mgmt Change The date and time of the most recent management-initiated change to this service.
Item Description
(2 of 2)
To Next Page
Loading...
