FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 475
7.10.3.11 secondary
Table 453 secondary command
Description This command enables remote proxy ARP on the interface.
Remote proxy ARP is similar to proxy ARP. It allows the router to answer an ARP request on
an interface for a subnet that is not provisioned on that interface. This allows the router to
forward to the other subnet on behalf of the requester. To distinguish remote proxy ARP from
local proxy ARP, local proxy ARP performs a similar function but only when the requested IP
is on the receiving interface.
Default no remote-proxy-arp
Item Description
(2 of 2)
Item Description
Syntax secondary {ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]
[igp-inhibit]
no secondary ip-address
Context configure>service>vprn>interface
Description Use this command to assign up to 255 secondary IP addresses to the interface. Each address
can be configured in an IP address, IP subnet or broadcast address format.
Default None
(1 of 2)
To Next Page
Loading...
