Nokia 7302 - Proxy-Arp-Policy; Table 450 Loopback Command; Table 451 Proxy-Arp-Policy Command; Table 452 Remote-Proxy-Arp Command

Virtual Private Routed Network Service
474
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 450 loopback command
7.10.3.9 proxy-arp-policy
Table 451 proxy-arp-policy command
7.10.3.10 remote-proxy-arp
Table 452 remote-proxy-arp command
Item Description
Syntax [no] loopback
Context configure>service>vprn>interface
Description This command specifies that the associated interface is a loopback interface that has no
associated physical interface. As a result, the associated interface cannot be bound to a SAP.
When using mtrace/mstat in a Layer 3 VPN context then the configuration for the VPRN should
have a loopback address configured which has the same address as the core instance's
system address (BGP next-hop).
Item Description
Syntax proxy-arp-policy policy-name [policy-name...(up to 5 maximum)]
no proxy-arp-policy-name
Context configure>service>vprn>interface
Description This command enables a proxy ARP policy for the interface.
The no form of this command disables the proxy ARP capability.
Default no proxy-arp-policy
Item Description
Syntax remote-proxy-arp
[no] remote-proxy-arp
Context configure>service>vprn>interface
(1 of 2)