Nokia 7302 - Configuring Router Interfaces

Virtual Private Routed Network Service
428
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
autonomous-system 10000
route-distinguisher 10001:1
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>configure>service#
7.7.3 Configuring Router Interfaces
Refer to the FD 100/320Gbps NT and FX NT IHub Router Configuration and
Protocols Guide for command descriptions and syntax information to configure
router interfaces.
The following example displays a router interface configurations:
ALA48>configure>router# info
#------------------------------------------
echo "IP Configuration"
#------------------------------------------
...
interface "if1"
address 2.2.2.1/24
port nt-a:sfp-1:4000
exit
interface "if2"
address 10.49.1.46/24
port nt-a:sfp-2:4001
exit
interface "if3"
address 11.11.11.1/24
port nt-a:sfp-3:4002
exit
...
#------------------------------------------
7.7.4 Configuring VPRN Protocols - BGP
Configuring BGP between the PE routers allows the PE routers to exchange
information about routes originating and terminating in the VPRN. The PE routers
use the information to determine which labels are used for traffic intended for remote
sites.