FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 559
7.10.12.5 base
Table 601 base command
Table 602 describes the command output fields.
Table 602 Show Service-ID Base Output
Type Static — FDB entries created by management.
Learned — Dynamic entries created by the learning process.
OAM — Entries created by the OAM process.
Age The time elapsed since the service was enabled.
Interface The interface applied to the service.
Port The port where the SAP is applied.
Label Description
(2 of 2)
Item Description
Syntax base
Context show>service>id
Description This command displays basic information about this VPRN service.
Label Description
Service Id The operating state of the service.
Vpn Id Specifies the VPN ID assigned to the service.
Service Type The type of service: Apipe, Cpipe, Epipe, Fpipe, IES, Ipipe, VPLS, VPRN.
Description Generic information about the service.
Customer Id The customer identifier.
Last Mgmt Change The date and time of the most recent management-initiated change to this customer.
Adm The desired state of the service.
Oper The service identifier.
Mtu The largest frame size (in octets) that the service can handle.
SAP Count The number of SAPs defined on the service.
Identifier Specifies the service access (SAP) points.
To Next Page
Loading...
