Nokia 7302 - Low-Priority-Defect; Mac-Address; Table 80 Low-Priority-Defect Command; Table 81 Mac-Address Command

Virtual Leased Line Services
140
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
4.6.5.14 low-priority-defect
Table 80 low-priority-defect command
4.6.5.15 mac-address
Table 81 mac-address command
Item Description
Syntax low-priority-defect { allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}
Context configure>service>epipe>spoke-sdp>eth-cfm>mep
Description This command specifies the lowest priority defect that is allowed to generate a fault alarm.
Default macRemErrXcon
Parameters allDef - DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCM
macRemErrXcon - DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCM
remErrXcon - DefRemoteCCM, DefErrorCCM and DefXconCCM
errXcon - DefErrorCCM and DefXconCCM
xcon - DefXconCCM
noXcon - No defects DefXcon or lower are to be reported
Item Description
Syntax mac-address mac-address
no mac-address
Context configure>service>epipe>spoke-sdp>eth-cfm>mep
Description This command enables configuration of the MAC Address for the MEP.
Parameters mac-address - The MAC address of the MEP in xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
Value: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx