Nokia 7302 - IGMP Snooping Show Commands; Table 275 Igmp-Snooping Command; Table 276 All Command; Table 277 Show All Service-ID Command Output Fields

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private LAN Service
Issue: 13 3HH-11985-AAAA-TQZZA 333
5.16.8 IGMP Snooping Show Commands
5.16.8.1 igmp-snooping
Table 275 igmp-snooping command
5.16.8.2 all
Table 276 all command
Table 277 describes the command output fields.
Table 277 Show All Service-ID Command Output Fields
Item Description
Syntax igmp-snooping
Context show>service>id
Description This command enables the context to display IGMP snooping information.
Item Description
Syntax all
Context show>service>id>igmp-snooping
Description This command displays detailed information for all aspects of IGMP snooping on the VPLS
service.
Label Description
Admin State The administrative state of the IGMP instance.
Querier Displays the address of the IGMP querier on the IP subnet to which the interface is
attached.
Sap Id Displays the SAP IDs of the service ID.
Oper State Displays the operational state of the SAP IDs of the service ID.
Mrtr Port Specifies if the port is a multicast router port.
Send Queries Specifies whether the send-queries command is enabled or disabled.
Max Num Groups Specifies the maximum number of multicast groups that can be joined on this SAP.
MVR From VPLS Specifies MVR from VPLS.
(1 of 2)