Nokia 7302 - Page 70

Services Overview
70
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7 If ccm-errors need not be propagated to the ring path (operational status),
configure all the defects as low-prio-defects for the eth-cfm mep of the
corresponding path.
8 Configure a control SAP (on a v-VPLS service) for the ring path with VLAN as
r-aps tag.
Below are the steps for unconfiguring a ring path:
1 Unconfigure the control SAP (as like any other sap) corresponding to the path to
be un-configured
2 Shut down the ring path
3 Shut down the eth-cfm mep on the ring-path
4 Unconfigure the eth-cfm mep on the ring-path
5 Unconfigure the ring path
Below are the CLI errors popped with some violations to the above guide-lines:
*A:FAD-Chassis# show service sap-using
==================================================================
Service Access Points
==================================================================
PortId SvcId Ing. Egr. Adm Opr
Fltr Fltr
-----------------------------------------------------------------
nt-a:xfp:1:300 1 none none Up Up
lag-30:1000 1000 none none Up Up
lag-30:1001 1001 none none Up Up
nt:vp:1:1000 2000 none none Up Down
nt-a:eth:1:0 4091 none none Up Up
nt:vp:1:4091 4092 none none Up Up
nt-a:xfp:2:40 10120 none none Up Up
------------------------------------------------------------------
Number of SAPs : 7
------------------------------------------------------------------
==================================================================
A:FAD-Chassis>configure>eth-cfm# domain 100 format none level 4
*A:FAD-Chassis>configure>eth-cfm>domain# association 1 format string name
"dummy"
*A:FAD-Chassis>configure>eth-cfm>domain>assoc#
*A:FAD-Chassis>configure>eth-cfm>domain>assoc# ccm-interval 100ms
*A:FAD-Chassis>configure>eth-cfm>domain>assoc# exit all
*A:FAD-Chassis# configure eth-ring 10
*A:FAD-Chassis>configure>eth-ring# no shutdown
*A:FAD-Chassis>configure>eth-ring#
*A:FAD-Chassis>configure>eth-ring# path a lag-30 raps-tag 1001
INFO: ERMGR #1004 Already configured - SAP lag-30:1001 already configured
*A:FAD-Chassis>configure>eth-ring# path a lag-30 raps-tag 1002
*A:FAD-Chassis>configure>eth-ring>path# no shutdown
INFO: ERMGR #1001 Not permitted - must configure eth-cfm MEP first
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm# mep 11 domain 100
association 1
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm>mep# exit
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm# exit
*A:FAD-Chassis>configure>eth-ring>path# no shutdown