Nord Drivesystems SK 300P Series - Figure 2: Explanation of Parameter Description

5 Parameter
BU 0800 en-4521 57
P000 (parameter number) Operating para. disp. (parameter name) S P
Setting range
or display range
Display of typical display format (e.g. (bin = binary)) of possible setting range and number of decimal places
Arrays
[-01]
If parameters have a substructure in several arrays, this is shown here.
Factory setting
{ 0 }
Typical default setting of parameters in the as-delivered condition of the FI, or to which it is set after
carrying out "Restore factory settings" (see parameter P523).
Scope of application
List of variants for which this parameter applies. If the parameter is generally valid, i.e. for the entire model
series, this line is omitted.
Description
Description, function, meaning and similar for this parameter.
Note
Additional notes about this parameter
Setting values
or display values
List of possible settings with description of their respective functions
Figure 2: Explanation of parameter description
Information
Parameter description
Unused lines of information are not listed.
Notes / Explanations
Label Designation Meaning
S
Supervisor parameter
The parameter can only be displayed and changed if the
relevant supervisor code has been set (see parameter
P003).
P
Depending on the
parameter set
The parameter provides various setting options which
depend on the selected parameter set.