Nordson AltaBlueA4TP - Shutting down the Melter

Melter control switch (A4)
Operation
4-33
Part 1107600_03
 2014 Nordson Corporation
Shutting Down the Melter
Shut the melter down when it will not be used for an extended period of time.
To shut the melter down
1. Switch the melter off.
2. Relieve system pressure. Refer to Relieving System Pressure in
Section5, Maintenance, as needed.
3. Disable the guns as follows:
 Air‐operated guns: Turn off the air supply to the guns.
 Electric guns: Turn off the gun driver, pattern controller, or timer.