Maintenance
5-1
Part 1107600_03
2014 Nordson Corporation
Section 5
Maintenance
WARNING! Allow only personnel with appropriate training and experience to
operate or service the equipment. The use of untrained or inexperienced
personnel to operate or service the equipment can result in injury, including
death, to themselves and others, and damage to the equipment.
Maintenance Schedule
Table 5‐1 describes the preventive maintenance tasks required to keep
AltaBlue TT melters operating within their specified limits and to prevent
equipment malfunctions. For information about maintaining optional
equipment that was supplied by Nordson, refer to the instructions provided
with the equipment.
If the melter stops operating or is operating incorrectly, refer to Section 6,
Troubleshooting, for information about diagnosing common problems and
performing corrective maintenance.
Table 5‐1 Preventive Maintenance Tasks
Task Frequency Reference
Relieving system pressure Before performing any maintenance
task that requires opening a
hydraulic connection or port
Relieving System Pressure
Cleaning the exterior of the melter,
hoses, and guns
Daily Cleaning the Melter
Continued...
To Next Page
Loading...
