Description
2-3
Part 1107600_03
2014 Nordson Corporation
Product Description
See Figure 2‐1. Nordson AltaBlue adhesive melters are used in conjunction
with Nordson hot melt hoses and guns to create a hot melt application
system.
The melter liquifies solid‐form hot melt and maintains the hot melt at the
desired temperature. When the guns are activated, the melter pumps the
liquified hot melt through the hoses and out the gun nozzles, where it is
commonly applied to the surface of a product.
1
2
3
Figure 2‐1 System components
1. AltaBlue melter
2. Hot melt hose
3. Hot melt gun
To Next Page
Loading...
