Installation
3-43
Part 1107600_03
2014 Nordson Corporation
Enter button—press (1) to move
through the programming steps or (2) to
confirm/enter the displayed value.
ESC button—press (1) to exit a menu
or parameter and return to a previous
step or (2) to clear an entry and revert
to the value stored in memory.
Jog dial—rotate (1) to move forward
(clockwise) or backward (counterclockwise)
through the menus or (2) to increase
(clockwise) or decrease (counterclockwise) a
value.
Display
Figure 3‐9 Motor drive buttons (located on the motor drive inside the electrical enclosure)
To Next Page
Loading...
