Nordson Asymtek X-1010 User Manual

Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 2-85 P/N 196515 (Revision A)
Lesson 2-10
Linear Encoders
A. Introduction
Linear encoders are mounted on each axis and keep track of the actual
dispensing head position. If the dispensing head starts and then stops or loses
its position, it may be necessary to adjust the encoders.
B. Enabling Objective
2.10 Perform the procedure to adjust the Linear Encoders.
C. Topic Outline
1. Introduction
2. Overview
 Linear Encoders
 Linear Encoder Calibration
3. Summary and Review

Nordson Asymtek X-1010 Specifications

General

Type	Dispenser
Accuracy	±25 µm
Fluid Types	Adhesives, sealants
Z-axis Clearance	Customizable based on configuration
Resolution	1 μm
Dispensing Technology	Positive Displacement
Maximum Dot Size	Varies with application
XY Positioning Accuracy	±25 µm
Z Axis Resolution	1 μm
Machine Dimensions	Varies based on configuration
Weight	Varies based on configuration
Power Requirements	200-240 VAC, 50/60 Hz