Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 2-135 P/N 196515 (Revision A)
Lesson 2-15
Board Sensors
A. Introduction
Board sensors are sensors located along the length of the conveyor rail that
detect the presence of a board or part. Board sensors should be adjusted after
initial installation and when the sensors are failing to sense the presence of a
board.
B. Enabling Objective
2.15 Perform the procedure to adjust board sensors.
C. Topic Outline
1. Introduction
2. Overview
Board Sensors
Upward Facing Sensors
Downward Facing Sensors
Sensitivity Adjustments
3. Summary and Review
To Next Page
Loading...
