Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 5-1 P/N 196515 (Revision A)
Lesson 5-1
Removing and Replacing Fuses
A. Introduction
There are approximately fourteen replaceable fuses on the X-1000 Dispensing
Systems depending on the configuration. All locations are clearly labeled.
B. Enabling Objective
5.1 Locate fuses on X-1000 Dispensing Systems and perform the procedure
to replace them.
C. Topic Outline
1. Introduction
2. Overview
Replaceable Fuses
Board Mounted
Panel Mounted
Box Mounted
3. Summary and Review
To Next Page
Loading...
