Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 2-91 P/N 196515 (Revision A)
Lesson 2-11
Height Sensor
A. Introduction
All X-1000 Dispensing Systems are equipped with a height sensor to ensure that
the dispensing system maintains a constant dispensing height during production
runs. As part of routine maintenance, it may be necessary to test the sensor and
adjust the probe.
B. Enabling Objective
2.11 Perform the necessary procedure to setup, configure and adjust the
height sensor.
C. Topic Outline
1. Introduction
2. Overview
 Height Sensor
 Theory of Operation
 Height Sensor Setup
 Probe Adjustments
 Laser Height Sensor
3. Summary and Review
To Next Page
Loading...
Need help?
General